Free Pool Resources & Guides

New Plaster Start-Up Procedure

Essential guide for curing and maintaining new pool plaster. Learn the proper brushing schedule, chemical balancing, and filling procedures for a perfect finish.

Backwash D.E. Filter Guide

Step-by-step instructions for cleaning Diatomaceous Earth filters. Includes backwash timing, DE powder recharging, and troubleshooting common filter issues.

Backwash Sand Filter Guide

Complete walkthrough for sand filter maintenance. Learn proper backwash cycles, rinse procedures, and when to replace your filter sand.

Pool Start-Up Checklist

Comprehensive checklist for opening your pool after winter or construction. Covers equipment inspection, chemical balancing, and safety checks.

In-Ground Spa Start-Up

Specialized guide for spa startup and maintenance. Includes heating procedures, jet adjustment, and maintaining proper sanitizer levels in smaller water volumes.

Pool Safety Checklist

Essential safety checklist for pool owners. Covers barrier requirements, drain safety, chemical storage, and emergency preparedness.

How often should I backwash my filter?

Sand and DE filters should be backwashed when the pressure gauge reads 8-10 PSI above the clean starting pressure, typically every 2-4 weeks during peak season.

What is the ideal pH level for my pool?

The ideal pH range is 7.4-7.6. This range provides optimal chlorine effectiveness while being comfortable for swimmers and preventing equipment corrosion.

How long should I run my pool pump?

In Las Vegas heat, run your pump 8-12 hours daily during summer, 4-6 hours in winter. Variable speed pumps can run longer at lower speeds for better efficiency.

Why is my pool water cloudy?

Cloudy water is usually caused by poor filtration, improper chemical balance, or early algae growth. Check your filter, test your water, and ensure adequate chlorine levels.